Ver el código de «ENEKO LAIZ iSCSI Drives»


'''by ENEKO LAIZ'''

Drives and Targets iSCSI Concept	

In computing, iSCSI is an abbreviation of Internet Small Computer System Interface, an Internet Protocol (IP)-based storage networking standard for linking data storage facilities. By carrying SCSI commands over IP networks, iSCSI is used to facilitate data transfers over intranets and to manage storage over long distances. iSCSI can be used to transmit data over local area networks (LANs), wide area networks (WANs), or the Internet and can enable location-independent data storage and retrieval. The protocol allows clients (called initiators) to send SCSI commands (CDBs) to SCSI storage devices (targets) on remote servers. It is a popular storage area network (SAN) protocol, allowing organizations to consolidate storage into data center storage arrays while providing hosts (such as database and web servers) with the illusion of locally-attached disks. Unlike traditional Fibre Channel, which requires special-purpose cabling, iSCSI can be run over long distances using existing network infrastructure.
Functionality

'''Storage consolidation'''
Organizations move disparate storage resources from servers around their network to central locations, often in data centers; this allows for more efficiency in the allocation of storage. In a SAN environment, a server can be allocated a new disk volume without any change to hardware or cabling.

'''Disaster recovery'''
Organizations mirror storage resources from one data center to a remote data center, which can serve as a hot standby in the event of a prolonged outage. In particular, iSCSI SANs allow entire disk arrays to be migrated across a WAN with minimal configuration changes, in effect making storage "routable" in the same manner as network traffic.

'''Concepts'''

'''Initiator'''
An initiator functions as an iSCSI client. An initiator typically serves the same purpose to a computer as a SCSI bus adapter would, except that instead of physically cabling SCSI devices (like hard drives and tape changers), an iSCSI initiator sends SCSI commands over an IP network. An initiator falls into two broad types:

''Software initiator''
A software initiator uses code to implement iSCSI. Typically, this happens in a kernel-resident device driver that uses the existing network card (NIC) and network stack to emulate SCSI devices for a computer by speaking the iSCSI protocol. Software initiators are available for most mainstream operating systems, and this type is the most common mode of deploying iSCSI on computers.

''Host Bus Adapter''
An iSCSI host bus adapter (more commonly, HBA) implements a hardware initiator. A typical HBA is packaged as a combination of a Gigabit (or 10 Gigabit) Ethernet NIC, some kind of TCP/IP offload engine (TOE) technology and a SCSI bus adapter, which is how it appears to the operating system.
''
TCP Offload Engine''
A TCP Offload Engine, or "TOE Card", offers an alternative to a full iSCSI HBA. A TOE "offloads" the TCP/IP operations for this particular network interface from the host processor, freeing up CPU cycles for the main host applications. When a TOE is used rather than an HBA, the host processor still has to perform the processing of the iSCSI protocol layer itself, but the CPU overhead for that task is low.

''Target''
iSCSI specification refers to a storage resource located on an iSCSI server (more generally, one of potentially many instances of iSCSI storage nodes running on that server) as a target. An iSCSI target usually represents hard disk storage that works over the IP or Ethernet networks.

''Logical Unit Number''
In SCSI terminology, LUN stands for logical unit number. A LUN represents an individually addressable (logical) SCSI device that is part of a physical SCSI device (target). In an iSCSI environment, LUNs are essentially numbered disk drives. An initiator negotiates with a target to establish connectivity to a LUN; the result is an iSCSI connection that emulates a connection to a SCSI hard disk. Initiators treat iSCSI LUNs the same way as they would a raw SCSI or IDE hard drive; for instance, rather than mounting remote directories as would be done in NFS or CIFS environments, iSCSI systems format and directly manage file systems on iSCSI LUNs.
In enterprise deployments, LUNs usually represent slices of large RAID disk arrays, often allocated one per client. iSCSI imposes no rules or restrictions on multiple computers sharing individual LUNs; it leaves shared access to a single underlying file system as a task for the operating system.

''Addressing''
Special names refer to both iSCSI initiators and targets. iSCSI provides three name-formats:

''iSCSI Qualified Name (IQN)''
Format: iqn.yyyy-mm.{reversed domain name} (e.g. iqn.2001-04.com.acme:storage.tape.sys1.xyz) (Note: There is an optional colon with arbitrary text afterwards. This text is there to help better organize or label resources.)
Extended Unique Identifier (EUI)
Format: eui.{EUI-64 bit address} (e.g. eui.02004567A425678D)
T11 Network Address Authority (NAA)
Format: naa.{NAA 64 or 128 bit identifier} (e.g. naa.52004567BA64678D)
IQN format addresses occur most commonly. They are qualified by a date (yyyy-mm) because domain names can expire or be acquired by another entity.

The IEEE Registration authority provides EUI in accordance with the EUI-64 standard. NAA is part OUI which is provided by the IEEE Registration Authority. NAA name formats were added to iSCSI in RFC 3980, to provide compatibility with naming conventions used in Fibre Channel and Serial Attached SCSI (SAS) storage technologies.

Usually an iSCSI participant can be defined by three or four fields:

Hostname or IP Address (e.g., "iscsi.example.com")
Port Number (e.g., 3260)
iSCSI Name (e.g., the IQN "iqn.2003-01.com.ibm:00.fcd0ab21.shark128")
An optional CHAP Secret (e.g., "secretsarefun")

'''iSNS'''
iSCSI initiators can locate appropriate storage resources using the Internet Storage Name Service (iSNS) protocol. In theory, iSNS provides iSCSI SANs with the same management model as dedicated Fibre Channel SANs. In practice, administrators can satisfy many deployment goals for iSCSI without using iSNS. 

'''Security'''

'''Authentication'''
iSCSI initiators and targets prove their identity to each other using the CHAP protocol, which includes a mechanism to prevent clear text passwords from appearing on the wire. By itself, the CHAP protocol is vulnerable to dictionary attacks, spoofing, or reflection attacks. If followed carefully, the rules for using CHAP within iSCSI prevent most of these attacks.
Additionally, as with all IP-based protocols, IPsec can operate at the network layer. The iSCSI negotiation protocol is designed to accommodate other authentication schemes, though interoperability issues limit their deployment.

To ensure that only valid initiators connect to storage arrays, administrators most commonly run iSCSI only over logically-isolated backchannel networks. In this deployment architecture, only the management ports of storage arrays are exposed to the general-purpose internal network, and the iSCSI protocol itself is run over dedicated network segments or virtual LANs (VLAN). This mitigates authentication concerns; unauthorized users aren't physically provisioned for iSCSI, and thus can't talk to storage arrays. However, it also creates a transitive trust problem, in that a single compromised host with an iSCSI disk can be used to attack storage resources for other hosts.

Authorization
Because iSCSI aims to consolidate storage for many servers into a single storage array, iSCSI deployments require strategies to prevent unrelated initiators from accessing storage resources. As a pathological example, a single enterprise storage array could hold data for servers variously regulated by the Sarbanes-Oxley Act for corporate accounting, HIPAA for health benefits information, and PCI DSS for credit card processing. During an audit, storage systems must demonstrate controls to ensure that a server under one regime cannot access the storage assets of a server under another.

Typically, iSCSI storage arrays explicitly map initiators to specific target LUNs; an initiator authenticates not to the storage array, but to the specific storage asset it intends to use. However, because the target LUNs for SCSI commands are expressed both in the iSCSI negotiation protocol and in the underlying SCSI protocol, care must be taken to ensure that access control is provided consistently.
iSCSI uses TCP/IP (typically TCP ports 860 and 3260). In essence, iSCSI simply allows two hosts to negotiate and then exchange SCSI commands using IP networks. By doing this iSCSI takes a popular high-performance local storage bus and emulates it over wide-area networks, creating a storage area network (SAN). Unlike some SAN protocols, iSCSI requires no dedicated cabling; it can be run over existing switching and IP infrastructure. As a result, iSCSI is often seen as a low-cost alternative to Fibre Channel, which requires dedicated infrastructure.
Although iSCSI can communicate with arbitrary types of SCSI devices, system administrators almost always use it to allow server computers (such as database servers) to access disk volumes on storage arrays. iSCSI SANs often have one of two objectives: